SGCC / SGCH — Steel Grade Overview

JIS G3302  |  Hot-Dip Galvanized Steel  |  Zhongtang Iron And Steel (Shandong) Group
View Products Contact Us
Steel Grades  ›  SGCC / SGCH

SGCC and SGCH are the Japanese-standard galvanized grades: SGCC for commercial forming and SGCH for full-hard applications such as corrugated roofing and ducting. Zhongtang supplies them as coils and slit strips with Z30–Z40 coatings for strip and up to Z275 for sheets — a staple export grade for Middle East and Southeast Asian markets.

Chemical Composition (Typical)

C %Si %Mn %P %S %Other
≤0.15—≤0.80≤0.050≤0.050—

Mechanical Properties (Typical)

Yield Strength (MPa)Tensile Strength (MPa)Elongation (%)Impact Test
SGCC: — / SGCH: ≥— (hard)SGCC: ≥270SGCC: ≥30—

International Equivalents

SGCC / SGCH corresponds to the following international designations, allowing you to cross-check against local standards and specifications.

Standard SystemEquivalent Designation
EN / DINDX51D+Z
ASTMA653 CS Type B
GB / ChinaDX51D+Z

Typical Applications

Frequently Supplied Together

Customers ordering SGCC / SGCH frequently combine it with the following grades.

Need SGCC / SGCH steel coils, sheets or plates?

Factory-direct supply with ISO9001 / ISO14001 / EU CE certification. Custom sizes and grades available on request.