SGCD — Steel Grade Overview

JIS G3302  |  Drawing Quality Galvanized Steel  |  Zhongtang Iron And Steel (Shandong) Group
View Products Contact Us
Steel Grades  ›  SGCD

SGCD is the Japanese-standard drawing-quality hot-dip galvanized steel with better elongation and drawability than SGCC. It is specified for drawn or formed parts such as appliance housings, automotive inner panels and electrical boxes, with zinc coating from Z60 to Z275 g/m².

Chemical Composition (Typical)

C %Si %Mn %P %S %Other
≤0.10—≤0.45≤0.040≤0.040Al balance

Mechanical Properties (Typical)

Yield Strength (MPa)Tensile Strength (MPa)Elongation (%)Impact Test
150–270270–380≥32—

International Equivalents

SGCD corresponds to the following international designations, allowing you to cross-check against local standards and specifications.

Standard SystemEquivalent Designation
EN / DINDX52D+Z / DX53D+Z
ASTMA653 DS / DDS
GB / ChinaDX52D+Z

Typical Applications

Frequently Supplied Together

Customers ordering SGCD frequently combine it with the following grades.

Need SGCD steel coils, sheets or plates?

Factory-direct supply with ISO9001 / ISO14001 / EU CE certification. Custom sizes and grades available on request.