DX51D+Z is the most widely traded hot-dip galvanized steel grade globally, produced to EN 10346 with zinc coatings from Z60 to Z275 g/m². Its low-carbon base and good formability make it ideal for construction, roofing, HVAC ducting, appliances and light-gauge framing. Japanese equivalent: SGCC.
| C % | Si % | Mn % | P % | S % | Other |
|---|---|---|---|---|---|
| ≤0.12 | ≤0.50 | ≤0.60 | ≤0.045 | ≤0.045 | Ti optional |
| Yield Strength (MPa) | Tensile Strength (MPa) | Elongation (%) | Impact Test |
|---|---|---|---|
| 140–300 | 270–420 | ≥22 | — |
DX51D corresponds to the following international designations, allowing you to cross-check against local standards and specifications.
| Standard System | Equivalent Designation |
|---|---|
| JIS | SGCC |
| ASTM | A653 CS Type B |
| GB / China | DX51D+Z |
| BS (old) | CR/GALV.01 |
Customers ordering DX51D frequently combine it with the following grades.
Factory-direct supply with ISO9001 / ISO14001 / EU CE certification. Custom sizes and grades available on request.