SPCC / SPCD — Steel Grade Overview

JIS G3141  |  Cold Rolled Carbon Steel  |  Zhongtang Iron And Steel (Shandong) Group
View Products Contact Us
Steel Grades  ›  SPCC / SPCD

SPCC and SPCD are Japanese-standard cold-rolled carbon steel coils and sheets. SPCC is the general commercial forming quality, while SPCD offers improved ductility for deep drawing. With a clean, smooth surface and tight thickness tolerance, they serve as base material for galvanizing, tinplate and painted products, and are widely used in appliance and automotive panels.

Chemical Composition (Typical)

C %Si %Mn %P %S %Other
≤0.15≤0.60≤0.60≤0.100≤0.050—

Mechanical Properties

Yield Strength (MPa)Tensile Strength (MPa)Elongation (%)Impact Test
SPCC: — / SPCD: 180–290SPCC: ≥270SPCC: ≥36 (0.5mm)—

International Equivalents

SPCC / SPCD corresponds to the following international designations, allowing you to cross-check against local standards and specifications.

Standard SystemEquivalent Designation
ASTMA1008 CS Type B / DS
EN / DINDC01 / DC04 (St12 / St14)
GB / ChinaSPCC / 08F / 10F

Typical Applications

Frequently Supplied Together

Customers ordering SPCC / SPCD frequently combine it with the following grades.

Need SPCC / SPCD steel coils, sheets or plates?

Factory-direct supply with ISO9001 / ISO14001 / EU CE certification. Custom sizes and grades available on request.