Customer requirement: 280 tons of [hot-dip galvanized profile]
Based on the drawings provided by the customer, we carried out the 【cutting + drilling】 process.
The required thickness of the hot-dip galvanizing for the customer was 【55 micrometers】.
The actual measured zinc layer thickness during the inspection was the lowest at 【86 micrometers】 and the highest at 【222 micrometers】, which was far higher than the customer’s requirement.
If you also have steel requirements for photovoltaic projects, please feel free to contact us at any time.
To better assist you in making your project selection, we offer the following reference suggestions:
| Scene | Recommended Steel Type | Surface Treatment | Explanation |
| General Ground Power Station | Q235B / Q355B | Hot-dip Galvanizing (≥ 65μm) | Economical and practical, suitable for most climate conditions. |
| High Load Areas (Strong Wind / Heavy Snow) | Q355B / Q420B | Hot-dip Galvanizing (Thickened) | High strength and weight reduction, specifications need to be determined through structural calculations. |
| Coastal High Corrosion Environment | Q355B + Zinc-Aluminum-Magnesium Coating / 316 Stainless Steel | Zinc-Aluminum-Magnesium or Direct Use of Stainless Steel | Stainless steel is costly, can be used in local key parts; Zinc-Aluminum-Magnesium is a relatively cost-effective solution. |
| Industrial Roof Distributed Power Generation | Q235B / Aluminum Alloy | Galvanized or Original Color Oxidation | The advantage of aluminum alloy’s lightweight is obvious, but costs need to be evaluated. |
| Agriculture / Fish-Light Hybrid Power Generation | Q355B (Enhanced Anti-corrosion) | Hot-dip Galvanizing + Coating | High humidity and chemical corrosion environment require enhanced protection. |
Contact Us：
WhatsApp： +86 15864006163（Click to inquire）
Email： admin@zhongtangsteel.cn