S235JR — Steel Grade Overview

EN 10025-2 (DIN St37-2)  |  Carbon Structural Steel  |  Zhongtang Iron And Steel (Shandong) Group
View Products Contact Us
Steel Grades  ›  S235JR

S235JR is the European standard non-alloy structural steel with a minimum yield of 235 MPa and 27J impact at +20°C. It originates from the former German DIN grade St37-2 and remains the most common structural steel in European and Middle Eastern projects. Equivalent to Q235B, A36 and SS400.

Chemical Composition (Typical)

C %Si %Mn %P %S %Other
≤0.17 (≤16mm)—≤1.40≤0.035≤0.035N ≤0.012

Mechanical Properties

Yield Strength (MPa)Tensile Strength (MPa)Elongation (%)Impact Test
≥235 (≤16mm)360–510≥26 (≤1mm) / ≥24+20°C, ≥27J

International Equivalents

S235JR corresponds to the following international designations, allowing you to cross-check against local standards and specifications.

Standard SystemEquivalent Designation
ASTM / AISCA36
JISSS400
GB / ChinaQ235B
DIN (old)St37-2

Typical Applications

Frequently Supplied Together

Customers ordering S235JR frequently combine it with the following grades.

Need S235JR steel coils, sheets or plates?

Factory-direct supply with ISO9001 / ISO14001 / EU CE certification. Custom sizes and grades available on request.